Cladding

Envello Board & Batten+

A look and finish like no other

The Board & Batten⁺ collection has been moulded from individual pieces of timber with a range of different masters, creating a truly unique balance for both contemporary and traditional designs.

With a tongue and groove profile that only requires fixings through the tongue, the installation time is dramatically reduced compared to the traditional method of timber batten-on-board cladding and the fixing is hidden.

The profiles on the Board & Batten⁺ are designed with differing angles to create shadow definition between the grain patterns, as well as facilitating drainage when used horizontally.

Available Finishes

Key Features

Specification

Board size
Coverage
Weight

200 x 26 x 3600mm
1.53 per m2
7.8kg

Product codes

Limed Oak – MCBF360L Burnt Cedar – MCBF360R
Antique Oak – MCBF360A Smoked Oak – MCBF360D
Golden Oak – MCBF360G Jarrah – MCBF360J

Frequently Asked Questions

Why is there a slight variation in board dimensions?

There will always be a slight variance in the board’s dimensions due to the fact that we mould from natural oak, and due to the pressure of the moulding process. Despite this, we calibrate the boards to maintain as consistent a profile as possible. The manufacturing tolerances are: Width: ± 3mm. Length: ± 5mm. Thickness: ± 2mm. The dimensions of the Weathered Oak style may vary more between moulds due to the fact that they are moulded from timeworn oak with minimal changes to the dimensions. When working with the boards, packers may be required to create a flush finish between two boards.

Dimensional variation is also possible with Millboard’s Envello® cladding boards and therefore the same manufacturing tolerances are applicable (Width: ± 3mm. Length: ± 5mm. Thickness: ± 2mm).

When using the Shadow Line+ product, in order to achieve straight and consistent 6mm gapping between boards, it may be necessary to use the Millboard Multi-Spacers during the installation process.

Is Envello Cladding Fire-Rated?

The Shadow Line⁺ cladding boards have been tested to BS EN 13501-1 and have a classification of D-s3, d0.

The Board & Batten+ range is also crafted with fire retardants in the board composition, but it is not fire rated and carries no ‘reaction to fire’ certificate.

The responsibility for the cladding’s suitability in the required location is to be determined by a certified building professional (building control, building insurance, fire officer, etc). Millboard will not be held responsible for incorrect specification, application, or product installation in areas not in accordance with government guidance, in the UK or abroad. Current guidance should be gained from the government website relating to the geographical project location, England’s building regulation Approved Document B can be found on – https://www.gov.uk/government/publications/fire-safety-approved-document-b

Envello Board & Batten+

Cladding